Acoustic Guitar Bridge String Ramping

  • Posts
  • Acoustic Guitar Bridge String Ramping

Acoustic Guitar Bridge String Ramping

IMG_1886

An acoustic guitar’s bridge and saddle work together to anchor and suspend the strings on the guitar body. During a setup, raising or lowering the saddle is one of the key adjustments to an instrument’s action. However, there are limits as to how far the saddle can be adjusted in either direction.

If the desired action requires that the saddle be too tall (sticking way up above the bridge), it will not have enough support to remain stable under string tension. Alternatively, sometimes the saddle must be lowered almost flush with the top of the bridge in order to achieve a comfortable string height. In extreme cases, no amount of saddle adjustment will yield a reasonable action. In this event, the instrument may require a neck reset to restore playability.

In many cases, the guitar may still be capable of being made playable with a low saddle, but experience a loss of tone and volume due to the fact that the strings have lost the defined bend  behind the saddle that once held them firmly in position. String ramping is a technique that will improve the playability of guitars that have a low saddle, while not negatively impacting the instrument should it receive a neck reset and a new saddle in the future. 

A Taylor Guitars Bridge With String Ramps

This modification to traditional acoustic guitar bridge design is so helpful that manufacturers, such as Taylor Guitars and Martin & Co. often employ it as a stock feature on their instruments. 

Zooming in on the photo, it is apparent that rather than just a rounded hole for the bridge pin, there is an extension off the front of each opening.

Ramping An Acoustic Guitar Bridge: Step By Step

A Martin Guitar Bridge In Need Of Ramping

This Martin guitar came into the shop with a fairly low saddle. While the action was comfortable, we could see that the strings were hanging up on the end of the bridge pin holes, preventing them from taking a straight line toward the saddle.

The absence of a proper angle behind the saddle creates a situation where the string is able to move slightly side to side when plucked. These micro movements rob the instrument of volume and also cause the saddle to wear quicker, necessitating more frequent replacement.

Filing String Ramps On The Bridge

To solve this issue, using a combination of saws and files, we create small grooves on the leading edge of each bridge pin hole. These hollows create a channel for the string to pass through, unobstructed, on their way to the saddle.

While taking care to make them inconspicuous, the width and length may vary depending on the needs of a given instrument.

The Bridge After Modification

Here is a shot of the bridge with the ramping nearly completed.  

The Finished Job

Once restrung,  the work is almost unnoticeable except for that the strings are now able to make a sharper line to the saddle.

We believe that the instrument is now louder and will experience less chance of saddle damage, string breakage, and tuning issues.

Before and After From A Different Angle

Before Ramping

After Ramping

About Guitar Repair Long Island

Guitar Repair Long Island is the area’s premier destination for fretted musical instrument care and maintenance. Led by owner/head technician Erik Salomon, the shop is dedicated to providing quick, honest, and reliable service. Our vast experience in all aspects of instrument repair ensures that we can help with whatever your needs are. Contact us with any questions or book your appointment today.

Sign-up for our Mailing List

Subscribe

* indicates required